Product usage related

What are the requirements for the filament compatible with AMS lite?

The AMS lite supports spools with a width of 40-68 mm and an inner diameter of 53-58 mm.

Avoid using AMS lite to print flexible materials, including TPU, TPE, or absorbent PVA.

Avoid using materials that are too hard (too high modulus) or too brittle (not enough toughness), including third-party fiber reinforcement materials (PET-CF/GF, PLA-CF/GF, etc.). Please use external spool placement to print these filaments.

Is CF filament OKAY to print using AMS lite?

For that, CF and GF filaments are overly brittle, hard, or rough, leaving them prone to breaking inside the AMS lite feeder channel or causing channel damage. As a result, utilizing them with AMS lite is not advised. CF and GF filament with better durability and relatively smoother surfaces, such as Bambu PLA-CF and Bambu PETG-CF, are compatible with AMS lite.

Can I use AMS lite on an X1 or P1 printer?

AMS lite is incompatible with the X1 or P1 printer. If you want a multi-color print using an X1 or P1 printer, you must use AMS.

Are there any precautions to take when using AMS lite? And what size of inner diameter spools work best for the AMS lite?

Avoid using AMS lite to print flexible materials, including TPU, TPE, or absorbent PVA. Avoid using materials that are too hard (too high modulus) or too brittle (not enough toughness), including third-party fiber reinforcement materials (PA-CF/GF, PET-CF/GF, PLA-CF/GF, etc.). Please use external spool placement to print these filaments. The AMS lite supports spools with a 40-68 mm width and an inner diameter of 53-58 mm.

How can I prevent the AMS lite from vibrating or moving due to vibrations while printing?

Please put the heavier spool in the 2/3 slot and the lighter spool in the 1/4 slot. The lower position of the heavier spool allows the AMS lite to have a lower and more stable center of gravity to avoid shaking or moving during printing.

Can the AMS lite be wall-mounted?

No, the AMS lite can not be wall-mounted, and to reduce the resistance during filament loading and unloading, you need to position the AMS lite in the following diagram.

Does the AMS lite support filament spool backup?

Yes, AMS lite will continue to another spool with the same properties of filament automatically when the current filament runs out.

Góp ý sửa bài