AMS lite Installation Tutorial

This article provides the guidelines and precautions for the disassembly and assembly of the AMS Lite. The disassembly and assembly of replaceable accessories involved in this disassembly process can also be handled with reference to this article.

Parts List

The following are the after-sales individual items that will be involved in this guide.

Assembly List

The assembly unit is not provided and doesn’t need further disassembly.

Screw List

Tool List

H1.5 / H2.0 hex key

Safety Warning

IMPORTANT!

It’s crucial to disconnet the AMS Lite from the printer before performing any maintenance work on the AMS and its electronics, because leaving the AMS connected while conducting such tasks can cause a short circuit, which can lead to additional electronic damage and safety hazards.

If you have any concerns or questions about following this guide, open a new ticket in our Support Page and we will do our best to respond promptly and provide you with the assistance you need.

Video Guide

Disassemble the AMS lite

Step 1 – Remove the four AMS Rotary Spool Holders

Disconnect the AMS Lite from the printer first; Hold the AMS Lite by hand, and pull off the 4 AMS Rotary Spool Holders in turn.

Step 2 – Remove the AMS Feeder Assembly

Remove the 4 screws A marked in the left image below, disconnect the black and red cable and the blue and white cable, then remove the whole AMS Feeder Assembly from the AMS Lite.

Step 3 – Remove the AMS Feeder Units

 Remove the AMS Feeder Units (1/2) by unscrewing the 2 screws B marked in the left image below.

Remove the AMS Feeder Units (3/4) by unscrewing the 2 screws B marked in the left image below.

Step 4 – Remove the AMS Stand

Remove the AMS Stand by unscrewing the 4 screws A (2 on each left and right side).

Assemble the AMS lite

Step 1 – Install the AMS Stand

Place the AMS housing assembly on the AMS Stand with the power cord facing up, gently press the AMS Lite main body to the fully expose the screw holes; Lock the 4 screws A on the left and right sides in turn to secure the AMS Stand.

Step 2 – Install the AMS Left/Right Feeder Units

Thread the blue and white cable through the AMS Filament Holder Rod and lock in 2 screws B to fix the AMS Feeder Unit (3/4).

Thread the black and red cable through the AMS Filament Holder Rod and lock in 2 screws B to fix the AMS Feeder Unit (1/2).

Step 3 -Install the AMS Feeder Assembly

Connect the 2 connecting cables per color; Mount the AMS Feeder Assembly to the AMS Lite main body and lock it with 4 screws A.

Step 4 – Install the AMS Rotary Spool Holders

Pair and install the four AMS Rotary Spool Holders per color in turn. Pay attention to the mounting direction before installation.

Verify the functionality

1. Connect the AMS Lite to the printer, turn on the printer power, and check if the indicator lights on the AMS Feeder are lit normally;

2. Insert filament to test the load/unload function of the AMS Lite;

If the test fails, please check all connections again and retry. If it still does not work, please contact the Bambu Lab service team.

Calibration step after the operation

Not required

Góp ý sửa bài