Bambu Studio supports full remote control and monitoring of the printer via network(WAN/LAN). These are a few of the features:

Features

Remote Printing
Send a print job to the connected printer via network

Control print job
Show the progress of the current print job. Start, stop or just pause your current print job, you are in full control at any time.

Play webcam LiveView
Play the webcam LiveView and watch remotely what your printer is doing

Control printer
Bed temperature, nozzle temperature, speed level, fan on/off, move the tool head along XYZE, calibrate the printer, AMS setting

Update device firmware
Update the firmware of the printer & AMS via network

Two network modes
Support Auto (use WAN and LAN accordingly) and LAN-only network mode

Preparation

Install the network plugin

Bambu network plugin is required for the remote control & monitor features in Bambu Studio. If it is not installed, You cannot send a print job via network and the “Device” page will be unavailable.

Register/Login

You need to log in first from the ‘Login/Register button on the first page.

Bind a printer

If no printer is bound to your account, you can bind a printer found in the same LAN.

We can also bind other printers using the same steps.

If we have bound more than 1 printer, we can select a different printer through the printer list.

Main Feature Introduction

Remote Printing

After we have finished slicing, we can send the result to the printer for printing; on the print dialog, we can select which printer and also we can choose the filaments in the AMS.

Control the print job

After the printing starts, we can find the ‘Printing progress’ of the current print job. we can stop or just pause/resume your current print job

Play webcam LiveView

No matter if printing or not, we can monitor the Printer from the  “Camera” tab.

Control printer

After the printer is selected, we can use the ‘Control’ widgets in the right panel of the ‘Device’ Page for the following controls:

  • X/Y/Z/E move
  • Bed temperature
  • Nozzle temperature
  • Lamp
  • Aux Cooling Fan
  • Part Cooling Fan
  • Speed Level

Also, we can use the “Print Options” to set the following options when printing:

  • Spaghetti Detection
  • First Layer Inspection

And we can click the “Calibration” button to let the printer do a calibration when not printing.

We can set the AMS filament from the AMS widgets in the right panel of the ‘Device’ Page, when the filament is not recognized automatically; we can also use the ‘Load/Unload’ button to load/unload filament in AMS.

Two network modes

Bambu Studio Supports two network modes:

  • Auto mode: it communicates with the printer via internet and local area network accordingly. The print file will be transfered to the cloud server to make the printer download from the remote. And it also helps to support printing again from the print history list in Bambu Handy. All the information and file is visible only to the user who sent the print task. By default the print files will be removed automatically after 90 days from the first printing. User can remove print files from cloud one by one from the Bambu Handy App’s print history menu, or auto remove all new print files by enabling the “Incognito Printing” option in App settings.
  • LAN mode: it communicates with the printer via the local area network. No print information and files will be transfered to cloud server in this mode. It’s safe for cases when the printed content needs keeping highly secret. (Please know more about it: How to enable LAN Mode on X1 / P1 series printers)

The printer is under Auto mode by default, we can turn on the “LAN Only” option on the Printer from the “Network settings”

and then bind the Printer by inputting the “Access Code” on Studio.

Góp ý sửa bài